Re: Won't Start After Rebuild

Posted by another Dave in MN on April 06, 2003 at 16:04:05 from (204.221.132.207):

In Reply to: Won't Start After Rebuild posted by Dave in MN on April 05, 2003 at 23:16:41:

Just went through this with my 400. It is possible to have #1 piston at TDC with the pointer on crankshaft pointing at the correct mark and still be 180 degrees off. It was quite a head scratcher for awhile. The other posts here seem to be right on the money also. Good luck!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Won't Start After Rebuild Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]