Cub sickle mower pulley

Posted by Wayne Mo. on May 14, 2003 at 21:38:58 from (171.75.223.85):

Has anyone figured out how to make a pulley for the Cub sickle mower. It is 4 and 4.5 in dia an cost $80 at the IHC dealer. I have a couple that are worn out with the splines worn out. Is there any way to use another splined part to rebuild the pulley inside diameter.
I am thinking of putting a metal shim between the worn pulley and the worn pto shaft and driving them on tight together and welding the back of the splined pto shaft to the splined pulley to hold it on. Will this work? Both the pulley and the shaft are junk anyway.

Follow Ups:

• Re: Cub sickle mower pulley Bob McCammon 17:22:41 05/15/03 (0)
• Re: Cub sickle mower pulley Randy in NE 04:16:04 05/15/03 (0)
• Re: Cub sickle mower pulley Bigdog 22:24:28 05/14/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Cub sickle mower pulley Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]