Using PTO for first time

Posted by Sean in Calgary on May 23, 2003 at 10:15:17 from (216.94.7.66):

I am about to fire up the PTO on my 350U Wheatland Gas for the first time tomorrow (I ran it for a few seconds once to make sure it actually works). I bought new HyTran for it and will make that swap tonight. Is there anything in sepcific I need to do or watch for so that I am not back on here Monday morning asking how to replace broken parts? I have the shield in place and will never get off the tractor while it is still spinning, I am just wondering about anything that might be worn or loose that I need to watch for.

Thanks again for all of the help that so many of you have provided over the last few weeks with all of my questions. I just want to be extra sure each step of the way so I don't break something and then have to try to find parts for a piece of equipment that is 10 yrs older than I am.

Sean

Follow Ups:

• Re: Using PTO for first time Shawn 16:11:25 05/24/03 (0)
• Re: Using PTO for first time Farmall450man 13:46:37 05/23/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Using PTO for first time Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]