Farmall & IHC Tractors Discussion Board |
Re: Farmall H, M, questions
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Krey in Indiana on June 04, 2003 at 04:18:18 from (12.220.204.241):
In Reply to: Farmall H, M, questions posted by Greg Carberry on June 03, 2003 at 12:58:29:
Greg- I have a '50 H which I use to maintain 25 very hilly acres in southern Indiana. I regularly mow about 12 acres with a 5 ft. rotary cutter. Like the other posting said, just set the wheels far apart, and I've never been too concerned. You just have to be careful and know your limits. The beauty of the narrow fronts is how maneuverable they are, especially when mowing all day, or working on trails or in the woods. The narrow fronts can spin around in a heartbeat. As far as the alternator, I replaced my 6 volt system with 12 volt last year and couldn't be happier with it. While I was at it, I also added electronic ignition and a high output 12 volt coil, and the tractor's never run better. I got all the parts and advice from Steel Wheels Ranch (available online), and they were very helpful. I used the delco 10si (I think that's right) two wire alternator. From what I've gathered from this web site, the one wire models can cause a power drain that kills your batteries pretty quick. The two wire was no problem to wire in at all. There's just enough room for the alternator. To mount mine, I just flipped the stock bracket upside down and mounted the new alternator to it. It's pretty snug, but it fits using the stock belt. Best of luck! -Krey Milltown, Indiana
Follow Ups:
Home
| Forums
Today's Featured Article -
Oil Bath Air Filters - by Chris Pratt. Some of us grew up thinking that an air filter was a paper thing that allowed air to pass while trapping dirt particles of a particles of a certain size. What a surprise to open up your first old tractor's air filter case and find a can that appears to be filled with the scrap metal swept from around a machine shop metal lathe. To top that off, you have a cup with oil in it ("why would you want to lubricate your carburetor?"). On closer examination (and some reading in a AC D-14 service manual), I found out that this is a pretty ingenious method of cleaning the air in the tractor's intake tract.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|