Farmall H hand crank cup

Posted by Jon Budde on June 30, 2003 at 09:20:16 from (12.34.182.168):

I have a 1943 H that has crank start only. The starter cup is worn out. By starter cup I mean the notched piece that meshes with the pin that runs through the front of the crank shaft. The notches are worn smooth and it is very hard to start with out the cup slipping over the pin.

Does anyone know where I can find one of these. Even a good used one off a parts tractor would be fine. The one I have has been welded on many times by the folks who had before me and it is pretty scary looking. Any help would be great. thanks.
jbood1@yahoo.com

Follow Ups:

• Re: Farmall H hand crank cup Jimmy King 21:37:48 07/05/03 (0)
• Re: Farmall H hand crank cup chris 06:00:00 07/01/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Farmall H hand crank cup Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]