which loader if any will work for me?

Posted by leeker on July 15, 2003 at 06:32:35 from (192.249.47.11):

Have a 560 which I am completely in love with, was my grandfathers before I took over the home farm. The farmer up the road says that either one of these loaders will work with my tractor. Neither one of them have any kind of identification on them due to recent paint job, but both are very clean with no welds or stress areas visible on the arms and both the buckets are remarkably straight and clean. One is on a Farmall H and the other is on a Farmalls M. Both have trip buckets, which I would obviously convert to hydraulics upon purchase. They both seem very responsive hydraulicly. I know that the rails between an M and a 560 are almost exactly the same.

The question I have is lengh and width if the frame is the same or similar enough that I can make it work?

I assume the H loader would be too narrow?

Thanks

Follow Ups:

• Re: which loader if any will work for me? here, try this 18:18:53 07/15/03 (0)
• Re: which loader if any will work for me? Hugh MacKay 18:14:40 07/15/03 (0)
• Re: which loader if any will work for me? jal-SD 11:26:01 07/15/03 (0)

Post A Followup Name: E-Mail: Subject: Re: which loader if any will work for me? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]