Re: M , back end noise (crownwheel pinion setup)

Posted by Wayne Swenson on July 27, 2003 at 11:53:45 from (66.228.234.107):

In Reply to: M , back end noise (crownwheel pinion setup) posted by mike on July 26, 2003 at 14:46:08:

What lube are you using? Get some 140 weight gear lube if possible (unless using in winter, up North) or the heaviest weight available.
Hy-Tran is a good lube but not enough "cushion" for noise reduction. The newer machines designed for Hy-Tran were made to tighter tolerances.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: M , back end noise (crownwheel pinion setup) Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]