Re: Farmall M running rough after rebuild

Posted by Rick(MN) on July 31, 2003 at 17:52:31 from (67.4.163.63):

In Reply to: Farmall M running rough after rebuild posted by Jeff on July 31, 2003 at 12:47:44:

I went thru this very thing a long time ago....fought and fought with it.....couldnt figure it out to save my life.....like you it was 2 cylinders right next to each other....was laying in bed one night and it came to me....the only thing these 2 cylinders had in common was the intake.....jumped out of bed....got dressed and ran out to the shop....pulled the manifold off and found a small peice of rusty gasket material that I had missed when I cleaned the manifold....cleaned it up....put the manifold back on and it ran like a champ...goes thru my mind every time I remove or replace a manifold.....Good Luck...Rick

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall M running rough after rebuild Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]