Re: H rear wheel distance [tire width] on axle

Posted by Paul in Mich on August 14, 2003 at 13:49:59 from (66.188.4.217):

In Reply to: H rear wheel distance [tire width] on axle posted by bill on August 14, 2003 at 06:28:57:

There are 2 general widths, but an infinite number of possibilities. One is to set the rears 56" center to center. That is 28" from centerline of the tractor. To get this width, it is best to have the castings dished inward. You can also set them 60" center to center, or 30" to CL. You can get 30" CL and wider with the castings dished out, but you also have more axle showing. Weights are also easier to hang in the dished in position. It just depends on what you plan to do with the tractor. There is no right width. Thats why they're adjustable. I have my H set on 56" center to center as it fits the trailer better.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: H rear wheel distance [tire width] on axle Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]