Farmall & IHC Tractors Discussion Board |
1929 Mccormick Deering 15-30, 22-36
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Out Back on September 02, 2003 at 23:52:05 from (64.126.190.87):
Wow! What a site! This is my first old iron. I've looked through all 13 pages, and think this is where I will be spending quite a bit of time. I've ordered the operator manual reprint. Only had the tractor for one week, and already have asked enough questions of others to generate a multitude of others. First, are there any other manuals I should try to find? Also, it is supposed to be a 15-30, model F, I've been told... at least it has 15-30 decals on the fenders. It was to have a 22-36 kit installed three years befor it was parked many years ago. 15-30 was not supposed to have a water pump. This engine has one attached to the head. Could they have put a 22-36 head on when they did a sleeve and piston upgrade? Finally found a SN stamped on the right side of the block near the front, # 110198. Does this number give a clue to what I actually have? Thanks, Out Back Dave
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|