Re: Need blowup drawing for Bolster H

Posted by RayP(MI) on September 13, 2003 at 05:56:25 from (216.46.197.212):

In Reply to: Need blowup drawing for Bolster H posted by George on September 13, 2003 at 04:47:56:

Don't quote me on this, but NAPA has access to many bearings - take your old ones in, and see if they can fix you up. If counter person is good, they can take measurements and compare with their books. If not, they can probably give you some leads on where you can go from there. (Been there- done that!) You can also try Detroit Bearing (Grand Rapids, MI) That's where I ended up on a set of bearings a while ago!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Need blowup drawing for Bolster H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]