Re: H cam gear

Posted by Haas on October 19, 2003 at 08:45:44 from (12.65.72.228):

In Reply to: H cam gear posted by JimBub on October 18, 2003 at 16:09:46:

Does your tractor have a magneto?? If you had the mag off or just the front part off to replace points, etc. you may have it 180 degrees out of time. To correct, take the front cover off (the one that give access to the points) and rotate the distributor rotor 1/2 turn and put it back on. If the time is out 180 degrees, it will blow air cleaner oil back out of the intake due to back fires.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: H cam gear Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]