Need help with I-544 3 point adjustment

Posted by Gramps544 on November 24, 2003 at 11:55:26 from (65.178.129.140):

I have a I-544. My lift control level is very loose. It wants to return to the forward position (toward the front of the tractor). This is very difficult to use as I have to leave my hand on the level to hold my 3 point lift at a given height. In my manual it states to move these two nuts with a punch. I tried using my punch, a large nail, even an old allen wrench (stuck it in the hole and hit it with a hammer) and the nuts will not budge.

This is a very small space to work in. Can anyone give me some hints on how to move these nuts? Picture show nuts right under the hydro. accessory valves.

Follow Ups:

• Re: Need help with I-544 3 point adjustment Bruce Wa. 15:33:27 11/26/03 (0)
• Re: Need help with I-544 3 point adjustment Gramps544 17:12:12 11/25/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Need help with I-544 3 point adjustment Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]