Re: Trip Plow Rope Holder

Posted by john d on December 03, 2003 at 18:46:44 from (152.163.252.227):

In Reply to: Trip Plow Rope Holder posted by Mike ISW on December 02, 2003 at 17:29:20:

Right rear corner bolt on the seat pan on most IH seats will work. My dad hitched the trip rope to the seat spring one time....only once. He it a rock, and when the plow unhooked, it pulled the spring out and the seat dropped like a rock!

I spent a lot of time on an H with a 2-14" trailing plow as a kid. When the old rope that was on it broke one day, I replaced it with a long v-belt that had been thrown in the trash. I cut it, fastened one end to the trip lever, and threaded the other end through the ring on the end of the furrow wheel lever. By folding the belt back and fastening it to make a loop on the end, it was always a short reach and I had the loop to grab instead of just a straight line. Didn't have to re-hook it every time I lost the plow, either!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Trip Plow Rope Holder Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]