Re: Re: H air cleaner ?

Posted by In the Red on December 05, 2003 at 13:53:20 from (4.72.104.239):

In Reply to: Re: H air cleaner ? posted by Red Dave on December 05, 2003 at 11:31:50:

I just did mine last week. It was very nasty so I chose to take it apart.Drill out the spot welds and pull out the screens one at a time. It takes a little time to do this cause as you get deeper into the canister they gets harder to grab.I used to long needle nose plyers to get in there.There are 15 seperate screens total.After cleaning slide them back in one at a time. you will have to line them all up in there to get them all to fit back in.Take note of how they came out and you shouldn't have any problem.Put in small rivits where you drilled the spot welds out.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: H air cleaner ? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]