Re: P B BLASTER?

Posted by The Red on December 29, 2003 at 11:54:55 from (206.246.187.2):

In Reply to: P B BLASTER? posted by Farmallkid on December 29, 2003 at 10:53:22:

If you haven't already, pull the head and clean out that diesel and use the PB Blaster. Make sure you spray in enough that the PB is level with the top of the each piston. When I pulled the pistons and sleeves out of Old Rusty H, I then pounded the pistons out of each sleeve. That PB Blaster had successfully worked it's way through the 3 compression rings in about a 2 month period. During that 2 months I had also sprayed around the outer edge of each sleeve. That PB worked down between the sleeve and cylinder wall fairly easily.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: P B BLASTER? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]