Re: Body filler for rust pits

Posted by CNKS on February 01, 2004 at 17:38:26 from (207.178.96.213):

In Reply to: Body filler for rust pits posted by Paul in Mich on February 01, 2004 at 13:44:19:

Remove all the rust you can, and use body filler, with hardener. Be prepared to do a lot of sanding. Some people recommend using epoxy primer first. As far as the hardener, you will get a faster drying harder finish. You can use spot putty for the pin holes that will occur in the filler. I sometimes use Eurosoft, it is a little easier to sand and has fewer pinholes. Don't understand why you don't like hardener -- it's not like the stuff you mix with paint.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Body filler for rust pits Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]