Re: M-live hydraulics

Posted by Lee Sackett on February 12, 2004 at 21:35:41 from (65.73.95.75):

In Reply to: M-live hydraulics posted by Steve on February 12, 2004 at 08:30:34:

Be sure to install a good releif valve in the system. You
may also want to consider replacing the cam timing gear
with one from a SM or newer tractor. I had to replace a
block for a customer that overloaded their hyd. system and
shattered two timing gears, cracked the block, blew out the
front timing cover, etc. Big big mess. He contacted me
because the engine wouldn't start. He had no idea of the
extremity of the problem. Talked to an old IH mechanic
and he said that was not uncommon. Just beware. :) It
works great when it's done correctly! Good luck and have
fun!

lsackett@iname.com

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: M-live hydraulics Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]