Farmall & IHC Tractors Discussion Board |
Re: smaller carb for H ?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by rebuilder on March 08, 2004 at 17:46:36 from (66.228.102.27):
In Reply to: smaller carb for H ? posted by riverbend on March 08, 2004 at 06:23:29:
Riverbend; H carburetors are the most popular carb I rebuild. I believe this is due to the unavailability of any aftermarket or "other application" crossovers. I am sure if you looked long and hard enough you could find something similar but I believe it would be a long row to hoe. As for there being different venturi, you are correct. It does not list it in the parts manual, but there are two sizes. The larger size is what I will call a rarity as I find it only in 10% of the H carbs I rebuild. The other 90% have the small venturi which incidentaly has the #24 stamped in the top of the venturi. I have been unable to find out what application the large venturi was for, my opinion leaning towards high altitude applications. If you need Inside measurements post me back on this site.
Follow Ups:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|