Re: Farmall M idles rough after warmed up

Posted by rick on March 25, 2004 at 10:29:27 from (12.2.62.71):

In Reply to: Farmall M idles rough after warmed up posted by rick on March 24, 2004 at 15:36:15:

Well this seemed almost too easy....went outside this A.M. and started the M....after 1-2 minutes it started idling rough again, I did the propane test several times and found no evidence of a leak. I wanted to try to play with the idle screw, there are 2 screws on the top of the carb, right by each other, one comes straight out of the side of the carb and the other one points out and forward at about a 45* angle, the latter one is the one I adjusted (45* angle one), I started to screw it in and the tractor instantly cleared up while at idle, I ended up turning it in one full turn, thats where it seemed to the run the best. Which screw did I adjust?? And what is the other screw right next to it? I beleive the screw on the bottom of the carb is the main jet, I did not touch it at all. THX Rick

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Farmall M idles rough after warmed up Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]