Re: CUB HEAD BOLTS

Posted by Rudi on March 28, 2004 at 08:49:46 from (24.230.211.52):

In Reply to: CUB HEAD BOLTS posted by mike on March 27, 2004 at 18:38:33:

Mike:

As with all things Cub!, a lot of this info is available on the Cub Manual Server.

The pic of the order is below, but not the torque value which in the GSS-1411 is stated as

"Install the cylinder head cap screws. Using the sequence shown, tighten evenly in steps to 45 ft.lbs torque. Be sure to install all brackets and mounting clips under the cap screw heads before tightening."

This may be found under the Blue Ribbon Service Manuals, GSS-1411, Group 1, Page 01-14.

While you are there peruse the server.

Hope it helps.

• Cub Manuals

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: CUB HEAD BOLTS Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]