Farmall & IHC Tractors Discussion Board |
574 3-point hitch stabilizers ?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tim on April 13, 2004 at 17:22:07 from (63.186.160.219):

I have an IH 574 utility tractor and was looking through the operator’s manual tonight. In it they mention stabilizer arms (#12, #13) on the 3-point hitch, which hook to brackets (#7) under the rear axle to the lower pins on the implement. I don’t seem to have any on mine but it seems they would be darn handy with some implements such as my snowblower and brush hog to name a couple. Was it an option or did someone remove mine. There’s not even any brackets for them. They look to be adjustable in length but it’s hard to tell. I do have the limiter chains (#15) and have tried adjusting these to help with the swaying problem but they’re kinda a pain to adjust that much. I also noticed in the parts section on this site a left and right hand stabilizer kit. (Part No: H457-LH) & (Part No: H457-RH) but the don’t have any picture of it. Sounds like it might be what I need but not positive without seeing it. Anyone know for sure? Thanks Tim
Follow Ups:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|