Re: Crank Pin Help

Posted by Dave@NY on April 16, 2004 at 20:32:54 from (216.42.140.122):

In Reply to: Crank Pin Help posted by Kent on April 15, 2004 at 19:38:02:

Soak it well with penetrant of choice.Have you losened the set screw? Takes a large flat blade screw driver.I had one come out with a few raps of the hammer.Last one I had to drill it out.Be carefull with the torch if you heat it.Too much heat on the end of the crankshaft might not be good.Good Luck!

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Crank Pin Help Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]