Re: (H) oil pressure

Posted by Randy SE-MN on April 30, 2004 at 06:09:03 from (206.9.216.81):

In Reply to: (H) oil pressure posted by Jonathan Mirgon on April 29, 2004 at 09:24:53:

Jonathan...I ordered one of those "new" oil pressure guages from OEM for my '52 H. I had previously been running a numeric guage from my late model race car that I knew was accurate. My oil pressure was 65 lbs...excellent pressure. I put on the "new" guage from OEM and it was as yours is, in the "red zone". I called OEM on it and they very pleasantly sent another one, but this one only reads "half way" which I interpret as 35-40 psi...still not accurate but what the he!! ya gonna do? The neelde is even offset from center slightly. I do not have a very high opinion of these "repro" guages. My suggestion is to compare the new one with another known good guage

Follow Ups:

• Re: Re: (H) oil pressure Jonathan Mirgon 07:37:21 04/30/04 (0)

Post a Followup Name: E-Mail: Subject: Re: Re: (H) oil pressure Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]