Re: Re: Re: Found a 300U problem, big to me

Posted by Dave W V on May 21, 2004 at 07:02:44 from (152.163.253.103):

In Reply to: Re: Re: Found a 300U problem, big to me posted by Loren, and a better descr on May 19, 2004 at 22:43:56:

The holes you refer to are weep holes for TA
clutch compartment. If your tractor is equipped with TA this clutch compartment is suppose to stay dry. It contains the TA clutch plate, pressure plate and release bearing. There is three seals that can leak into this compartment, toward the front of tractor there is a seal for the IPTO drive gear shaft, to the rear there is a seal on the TA input shaft also a larger one on the planet carrier. There is a cover on top of housing that can be removed to look at TA clutch but is hard to get to on Utility tractor.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: Re: Found a 300U problem, big to me Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]