Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Help for IH 1486 Hydraulics
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Francisco López on May 24, 2004 at 20:36:02 from (200.66.165.187):
In Reply to: Re: Re: Re: Help for IH 1486 Hydraulics posted by the tractor vet on May 22, 2004 at 17:22:29:
Dear Tractor Vet Thanks again for your advice. I just came back form the place where the tractor is located. I spent sunday doing some work and I will try to explain what I did before reading your note. First of all I drain oil and check prefilter ( metal mesh) and filter. To my surprise both were blocked mainly the mesh. Second I dismantled the MCV and found it dirty, at the time removing each piston and spring I inspected them carefully and found all of them with scratches even one of them with pitting, I polished all of them with sand paper and placed them back. Also the springs inspected and were fine (Although I can´t say any thing about the tension). I washed all the stuff with diesel includind the bolck itself. Filled with oil and run it. Like magic EVERYTHING WORKED FINE. I did not find any air coming out when brakes were bleed. The only thing I don´t like is that I don´t have an exact conclusion of what it could have been, either the filters or the MCV. Any how I think I will have to get pistons and springs and also spare pumps. I will keep in mind your advice on how to meassure flow and pressure. Just one last request, Could you pass the info on HY CAPACITY to me? I got the URL or web page and have sent e-mails but no reply at all. Finally, I´d like to thank MMM who reply to my need of help and also tofor your help, for your time and interest.I really appreciate your help. Regards Francisco.
Follow Ups:
Home
| Forums
Today's Featured Article -
Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
Latest Ad:
1997 cub cadet 7275 compact utility tractor 4wd hydro trans cracked block 3500
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|