Re: 560 diesel start up

Posted by RN on June 04, 2004 at 23:12:48 from (166.126.218.245):

In Reply to: 560 diesel start up posted by bryan on June 04, 2004 at 19:46:06:

normal start drill 560D- glowplugs on 1 minute, fuel button in(run position), starter 10 seconds. pause 30 seconds if not started, repeat up to 4 times. If it hasn't started by then, something wrong or it's below freezing. Cold adjust valves to about .025/.030, run about 10 minutes fast idle, drive around 10 minutes, then reset to manual specs about .018? Check head bolt torque at same time, check for coolant and oil leaks, watch oil pressure and temperature. RN.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: 560 diesel start up Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]