Re: Starting old H

Posted by Dave on June 20, 2004 at 17:09:49 from (67.2.194.249):

In Reply to: Starting old H posted by nick on June 19, 2004 at 16:10:14:

EITHER THE PLUG WIRES ARE OFF OR ROTOR IS OFF 180 DEGREES, TIME IT FOLLOWING THE PROCEDURE IN A MANUAL OR IN THE ARCHIVES. wITHOUT A DOUBT CLEAN THE CARB COMPLETELY AND MAKE SURE THERE ARE NO PORTS PLUGGED. a QUICK ( CHEAP ) REBUILD IS A good idea as long as it is off. All a h needs is gas, timing, spark and it will run. Before you pull out the rings , do a compression test. Maine did the same thing after repacing bout everthing and it was the timing

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Starting old H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]