Re: Grease fitting for pilot bearing

Posted by Haas on July 22, 2004 at 18:35:12 from (12.65.54.128):

In Reply to: Grease fitting for pilot bearing posted by BB on July 21, 2004 at 19:39:41:

As others said, the pilot bearing fitting is in the rim of the flywheel. It is recessed, so it may be covered with grease and dirt and hard to locate. Most pilot bearings have been replaced by now with "permanently" lubed bearings and thus the fitting may not be connected to anything. If it is like the M, there is a tube that runs on the front side of the flywheel to the pilot bearing. If you find the fitting, don't give it more than a couple pumps from the gun. Too much and you'll get grease on the clutch with not so good results. Also needs grease no more than once a year, maybe not that much if you just have a show tractor, doing no real work.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Grease fitting for pilot bearing Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]