Re: Adding hydraulics to an IH Model 584

Posted by Bernard le mécano on July 22, 2004 at 20:06:17 from (207.134.179.202):

In Reply to: Adding hydraulics to an IH Model 584 posted by David D Tidwell on July 22, 2004 at 13:01:20:

Hi David, the IH loader that will fit on your tractor is a 1850 or a 2250. The 2250 is minute-mount. Check for a 1/2 steele pipe on the right side of the hitch cover, on the back of the remote control. It's the oil return from the remote, run a hose on the remote fitting, to the IN of the loader control and run a hose to the large plug under the right rear axle. Plug the steele pipe. It's the easy way to run a loader. Dealer will sold a plate and adapter that replace the end plate of the remote(3 or 4 bolts pattern) It's much expensive.
Bernard le mécano Québec Canada

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Adding hydraulics to an IH Model 584 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]