Re: 460 starter revisited

Posted by captaink on August 09, 2004 at 09:13:25 from (66.115.212.249):

In Reply to: 460 starter revisited posted by Tim D on August 08, 2004 at 15:30:20:

You may be on the right track with the ring gear, as if it is bad enough it might hold in the starter drive which will in turn keep the solenoid engaged enough to keep the starter running.

When the starter was rebuilt was a new starter drive installed? If not, I would try a new one to see if that helps. If not, how bad is the ring gear? I have heated them up with a acetylene torch, removed them and turned them front to back and used them again. This of course requires splitting the tractor.

Hope this helps…

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]