Re: Capacity

Posted by TP from Central PA on October 17, 2004 at 15:52:33 from (152.163.101.13):

In Reply to: Re: Capacity posted by Allan in NE on October 17, 2004 at 14:58:53:

I have been reading these posts of yours Allan and I got a brain fart.............Maybe you could fill your rear end with Hy-Tran and plumb hoses, and coupled with a filter, maybe you could use the rear end as your reservoir? Maybe enlarge/tap a hole already in the case and run the oil through a filter, then to the pump/valve/loader, and dump it back into the tranny for the cycle to start over.

We ran Hy-Tran in our "M" and that would be how I'd do it if we would have put a Live Pump on it. Only question though, would those old pumps suck the oil up, plus filter it?

Follow Ups:

• Re: Capacity Brian Schmidt 17:04:23 10/17/04 (2)
  • Re: Capacity TP from Central PA 18:00:23 10/17/04 (0)
  • Re: Capacity CNKS 17:33:14 10/17/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]