Re: Repairing a cub

Posted by Andy Martin on November 03, 2004 at 15:32:01 from (64.219.39.195):

In Reply to: Re: Repairing a cub posted by Gene on November 03, 2004 at 12:03:39:

Letting the tank dry for several days is a little risky if it has lots of rust in the bottom. You can generate fumes after you thought it was clean.

For a novice, clean the tank as described, then refill the tank full of clean water, with just a little air right under the patch (patch on top) so you only have a small volume to explode if your cleaning was insufficient.

This also works well on 55 gallon drums you want to cut the top off of or weld a nozzle into.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]