Re: plow hitch

Posted by Hugh MacKay on November 30, 2004 at 03:15:39 from (216.208.58.185):

In Reply to: plow hitch posted by Max adams on November 29, 2004 at 17:55:35:

Max: The part number for what IH call the pull beam coupling on the 312 and 412 plow is 526 832 R91. That part is basically two fast hitch forks joined by a round shaft gives proper spacing betwwen forks and would judge is about 1.5 to 2 inches in diameter.

I think you could quite easily fabricate that from fast hitch forks. The forks do have a turned up end towards shaft. I didn't look at photos retired posted in gallery, but the photo he sent me was quite clear. I think with a copy on that photo you could come up with just what you need in fabrication.

I went through my plow parts book and don't see any other plow models with that exact part.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]