Re: 1066 3pt

Posted by dph on December 14, 2004 at 20:48:13 from (64.12.117.13):

In Reply to: 1066 3pt posted by Brad Merck on December 14, 2004 at 18:21:34:

Having the same problem with our 3588. I posted on the redpower site and got a lot of responses yesterday. www.redpowermagazine.com Pull the top link anchor off the back of the rear end and check the linkages going down to the torsion bar below the PTO. The lever coming up from the bottom, called the sensing arm, should be in front of the linkage coming down from the top. There is also a set screw on the sensing arm that could have come loose. See if the lock nut is tight. Also pull the access plate of that is located just inside of the hitch quadrant at the seat. Make sure the linkage pins are still there connecting the hitch and draft control levers to the linkages.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]