Re: Belly pump on IH H

Posted by Herb In Tx on December 29, 2004 at 10:16:16 from (138.163.0.38):

In Reply to: Belly pump on IH H posted by Greg Cyza on December 29, 2004 at 06:47:24:

Might try this first. When I first got my super H {early with belly pump} The hydraulics would not hold eiter. But i did notice that they would hold if I held the handle for the lift about a 1/2 inch from the stop where it would normally hold, it would in fact hold there. S i walked out to my 44 H and noticed the support for the control rod was at a slightly different angle. Then I got out my trusty 18 inch pipe wrench and bent the support to where the cylinders woould remain in the position I left them and the pump not be in stroke. Been working fine for more than a year now.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]