|
Farmall & IHC Tractors Discussion Board |
Re: Pilot bearing worn. Split the 230 apart. Ques
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Randy in Pa on December 29, 2004 at 19:11:46 from (67.140.4.82):
In Reply to: Re: Pilot bearing worn. Split the 230 apart. Ques posted by riverbend on December 29, 2004 at 18:59:25:
Well I called the case/international people today and they still make that sleeve for about $25. They will let me know in the morning if there distributor has it. If they do I can have it fri Am. The clutch is sort of worn so I am replacing it too. Pressure plate looks OK. I will probably change the throwout bearing since it is only about $25. Funny thing that the new pilot bearing is only 1 inch long and the old one is 1 1/2 inches long. I am going to buy 2 and saw one in half to make up the other half inch and drive it in first. Thanks for the interest. Randy
Follow Ups:
Home
| Forums
Today's Featured Article -
Pitfalls of Tractor Engine Rebuilds - by Chris Pratt. The first pop after you have put the machine together with your own hands is exciting and pleasing. The whole experience can be marred if one moves too fast and makes too many assumptions that they can just use "as is" some parts they should be closely scrutinizing and possibly attended to. In such cases, rework makes what could have been a fun project turn into an irritant or even a nightmare. Minor Irritants To give you an example of an minor but irritating proble
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
