Re: Getting more horse power out of a M

Posted by captaink on December 30, 2004 at 16:33:22 from (64.33.250.37):

In Reply to: Re: Getting more horse power out of a M posted by RustyFarmall on December 30, 2004 at 07:27:30:

I would suggest taking a compression test before pulling the head. If you have 120 psi or more and all holes are within 10% of each other you won't gain much with a valve grind. You can also look for a different head that might have a smaller combustion chamber giving you a higher compression ratio.ax

My 2 cents.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]