Farmall & IHC Tractors Discussion Board |
1256 Not Charging
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by 1256 puller on January 02, 2005 at 04:51:39 from (12.147.204.247):
My dad and I are rebuilding a 1256 for pulling ,we just finished the drivetrain and everything is working great except the alternator is not charging. We had the alternator rebuilt and hooked it up the way it was when we got the tractor ,however we never had a chance to see if it charged before we tore the tractor down.The only wires going to the alternator are the two in the dual plug and one going to the large external post and nothing going to the small post.We can get the alternator to charge if we pull the regulator cover push the contacts together .Is the regulator the problem or is the wiring wrong? Also if anyone out there has big lines,injectors ,and a 450 head Roosa for sale let me know.I might be interested in selling our completely rebuilt stock set-up,lines,injectors and pump-works great except I doubt we'll have enough fuel for pulling.The only thing modified in the pump is the leaf spring is cranked down,otherwise completely stock.
Follow Ups:
Home
| Forums
Today's Featured Article -
Fabrication (Who Me? Make it myself?) - by Chris Pratt. First of all, what are the reasons for not fabricatin your own parts? Most judgements on what should be purchased rather than fabricated stem from: Originality - If the tractor restoration is to be 100% original, it is likely that you should spend the time and money to locate the component in the used or New-old-stock market. Since this can be extremely difficult, you may want to fabricate the item or purchase a modern replacement temporarily, but eventually, you s
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|