Re: Westendorf Loader Cylinders

Posted by captaink on January 03, 2005 at 12:45:31 from (66.115.214.56):

In Reply to: Westendorf Loader Cylinders posted by Eric NW Iowa on January 03, 2005 at 12:19:30:

I have a Westendorf WL-42 on a 966. The man is correct that they offered two different cylinders and since it came off a JD tractor, it is probably equipped with the high pressure ones. It seems to me that when I ordered mine, the only difference was the diameter of the piston in the cylinder, in which case I doubt that the cylinders are your problem, especially since I remember them not going up, but would go down before (could be wrong here).

I would try removing all couplers (tractor too) and plumb the loader directly using pipe fittings and see if that takes care of the problem and go from there.

Please post back with results.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]