Re: Farmall A Governor

Posted by Jon B. on January 08, 2005 at 15:53:23 from (24.241.16.173):

In Reply to: Farmall A Governor posted by Matt on January 08, 2005 at 15:28:36:

The mag should come off first. Then slowly crank the motor until you see a cam gear tooth with two punch marks. The cam gear should have one tooth that has a single mark (for aligning with crankshaft) and a double mark for aligning with the governor/distributor gear. Once the governor/distributor gear is in place, the mag can then be timed. Hope that helps

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]