Re: A crankshaft.

Posted by justin w on January 13, 2005 at 17:23:52 from (216.188.207.180):

In Reply to: A crankshaft. posted by Opa A on January 13, 2005 at 16:05:30:

different people will say different things about the hardning of the IH cranks. Most will say not to go beyond 0.030, but the aftermarket in some cases did make 0.040 & 0.060 (semi-finished) bearings. The 0.060 bearings were marketed mainly so a shop could carry one size of bearing & finsih size it to the desired undersize. IH did market 0.032 slight wear bearings for the 0.030 crank. If you are interested I can supply an IH factory reground crank in 0.030 with the rod bearings, main bearings, and NOS crank pulley.. Email me if interested.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]