Re: Parts sources

Posted by riverbend on January 14, 2005 at 06:01:39 from (208.160.35.1):

In Reply to: Parts sources posted by CNKS on January 13, 2005 at 17:42:12:

Is your cam too far gone to regrind ? The one from the H had a few thousandths worn off the lobes. It was reground from .202" lift to .240" and I had no problems with getting the valves adjusted. It has not run for 60 years yet, so I can not vouch for durability. Lifters can be refaced also, if they are not too worn.

Follow Ups:

• Re: Parts sources CNKS 06:24:04 01/14/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]