Farmall & IHC Tractors Discussion Board |
Re: Delco 10SI alternator
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by farmallhal on January 17, 2005 at 19:39:38 from (216.106.33.134):
In Reply to: Delco 10SI alternator posted by 12 Volt Wanna be on January 16, 2005 at 15:17:58:
I would highly recommend using a Hitachi #14231 alternator which is smaller then a Delco 10SI. The NAPA part no. is 213-8130 and the application is for a 1978 thru 1980 (and maybe others) pickup with a 2 liter engine. I recently installed one on my H and have plently of clearence between the alternator, valve cover and the hood. Another trick that made this conversion really nice was by turning over the generator bracket and mounting the alternator on it with a long pivot bolt and some tube spacers and washers was being able to retain the existing generator belt for use with the alternator. I put a split lock washer which came with the alternator between the two alternator pulley halves and an external tooth lock washer under the nut on the alternator shaft. By turning the generator bracket upside down you raise the pulley centerline about 1 1/2" which took out the slack in the existing genertor belt while maintaining clearance between the valve cover and hood. Didn't have to play with the tractor pulleys or belts at all. Also, the gentleman referred to in one of the posts with the Hitachi alternator for sale is John Church (JWC1934@aol.com). Hope this is of some help to you.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
1997 cub cadet 7275 compact utility tractor 4wd hydro trans cracked block 3500
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|