Re: Riverbend

Posted by CNKS on January 31, 2005 at 08:40:57 from (204.249.178.138):

In Reply to: Re: Riverbend posted by brtx on January 30, 2005 at 20:35:54:

I don't think the pedestals need to be milled. IH says the rocker bushings are not replacable, but the IHCparts.com truck site sells bushings (C221 is a variant of the Black Diamond truck engine) -- That's something else I need to ask the machinest, however, he says he doesn't do rockers -- there are others in town. The rockers consist of two stamped steel pieces (at least I think they are stamped, ignorant about different types of metal preparation) welded together side to side, I don't know yet if the bushing is actually welded or simply pressed in. It appears to me that if it takes a lot of pressure to remove the bushings, if they are not welded, that it would be possible to bend the rocker, I don't know.

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]