Re: h govenor

Posted by the tractor vet on February 18, 2005 at 10:10:28 from (4.124.86.7):

In Reply to: h govenor posted by RandyNark on February 18, 2005 at 09:55:23:

More then likely there is to much sloop where the spring goes as the bushing that use to be in there are gone and you now have big sloopy holes and probably ware else where . The two hole that the govener spring hooks to sholud be just a wisker bigger the the diameter of the spring and have a littel champer on both sides of the bushings . This is what i have found on most of them . I have a freind that is a clock maker that makes me the bushings and ya could not beleive the differance it makes , We did his S/MTA and he was amassed it the power differance.

Follow Ups:

• Re: h govenor RustyFarmall 10:41:54 02/18/05 (4)
  • Re: h govenor the tractor vet 11:20:50 02/18/05 (3)
    • Re: h govenor RustyFarmall 11:43:55 02/18/05 (2)
      • Re: h govenor the tractor vet 11:52:03 02/18/05 (1)
        • Re: h govenor RustyFarmall 11:59:28 02/18/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]