Re: 3 point for IH 300 utility

Posted by gascolator on February 24, 2005 at 12:49:25 from (151.197.212.40):

In Reply to: 3 point for IH 300 utility posted by Amishbob on February 22, 2005 at 16:33:12:

Do you have a 2-point fast-hitch?

If so, depending on what you want to do, all you
need to do is to buy the adaptor prongs and a
top link. IHC actually intended for it to
adaptable this way, so there is a place to put
the top link on the rockshaft.

We use ours with a 6' King Cutter rotary and
a 7-foot King Cutter blade for snow plowing,
and it works fine. You have to figure out the
nuances of locking down-force in and out and
controlling whether it can sway or not (just
where you put pins) but it really is just fine.

Oh...the fast hitch ain't so fast this way, and
it takes some practice to get the prongs on
the implement, back up to just the right spot,
set them into the receivers, and then back down
to lock them.

Follow Ups:

• Re: 3 point for IH 300 utility amishbob 13:00:30 02/24/05 (0)
• Re: 3 point for IH 300 utility amishbob 12:58:03 02/24/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]