Re: RE; 350 utility; need help with points and co

Posted by r4etrired on February 25, 2005 at 18:21:06 from (152.163.101.13):

In Reply to: RE; 350 utility; need help with points and conden posted by Brooks on February 25, 2005 at 17:01:43:

Brooks,normally when a tractor like yours is converted to twelve volts there is a resistor installed 12 volt to 6 volt ahead of the coil Thus keeping the ignition system original.This was still used on the 46o-560 series. Check an see if you have this resistor, Most of them were mounted close to the coil.Also on the 460 and 560 there was an additional contact on the starter solenoid to provide 12 volts to the coil while the starter was being used the switched back to to the resister when the starter button was realeased,You can run 12 volts to the coil but the points will be very short lived, The factory resistor was white ceramic about 2.5 in long.

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]