Farmall & IHC Tractors Discussion Board |
International 300 330 350 Utility Steering
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ibby on February 28, 2005 at 04:00:59 from (63.146.104.143):
I've been watching the threads concerning the weaknesses in the steering of these tractors. I certainly can sympathize, having spent one hellacious gob of money buying a nearly new power steering assembly for my 350. I sold the old unit to a friend that wanted to rebuild it for his 300 utility. He was able to replace most of the worn parts with ones from his old manual box and about $250 worth of seals and gaskets. The interesting thing is - his old manual box was tight and just like new inside, even though it was older and the tractor beat up as bad as mine was. THe first big difference was in the previous owners maintenance. (He bought it from my uncle, so I've know and driven that tractor for a lot of years) My uncle changed all the fluids once a year, including the gear oil in the steering box. The previous owner of my 350 only changed the engine oil once in a blue moon if he remembered. (The other fluids ran out almost as fast as they were poured in, so he assumed that topping them off was as good as a change.) I think the REAL culprit in the steering problems is loader use. Mine had a worn out and beat to crap loader on it, his 300 didn't. I think loader use rips these up more than normal. I've removed my loader and won't put it back on. I'm also keeping close track of the gear oil and other maintenance items, and we'll have to see how long it lasts. I do wonder if a set of steering stabilizer shocks from a pickup would help smooth the sharp snaps that put a lot of stress on the steering boxes.
Follow Ups:
Home
| Forums
Today's Featured Article -
Fabrication (Who Me? Make it myself?) - by Chris Pratt. First of all, what are the reasons for not fabricatin your own parts? Most judgements on what should be purchased rather than fabricated stem from: Originality - If the tractor restoration is to be 100% original, it is likely that you should spend the time and money to locate the component in the used or New-old-stock market. Since this can be extremely difficult, you may want to fabricate the item or purchase a modern replacement temporarily, but eventually, you s
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|