Re: IH 574 Steering Leak

Posted by Bernard le mécano on March 06, 2005 at 21:27:29 from (207.134.157.194):

In Reply to: IH 574 Steering Leak posted by TDK on March 05, 2005 at 20:34:27:

Hi TDK, on the 574 tractor, like 74 and 84,85,95 serie, it's a Danfoss steering valve. You have to remove all the valve from the tractor and open the valve to change the seal. Some part inside have to be timed, so if you don't have open a Danfoss valve before, good luck.Best way, keep the valve to a CaseIh dealer and ask to change the seal. To instal the seal, you need a special tool. Be careful when you remove the steering wheel, don't blow on the shaft with a hammer, remove the wheel with a puller. I have done many seal change when i have worked for CaseIh dealer.
Bernard le mécano Québec Canada

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]